QuickServer Serial Ethernet

EtherNet/IP, BACnet/IP, and BACnet MS/TP QuickServer Gateways


Active Mature: Product is fully supported, but a newer product or family exists.
For new applications use the PS-QS-2x10-F

The QuickServer line of communication gateways are designed to link building automation driven networks with industrial control networks. The PS-QS-1x10-0780 simultaneously supports EtherNet/IP, BACnet/IP, and BACnet MS/TP, allowing for any combination of protocols to be used. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.

QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. If the user prefers the unit to be pre-configured prior to delivery, FieldServer offers a custom configuration service.

Funktionen und Vorteile

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX)

Technische Daten

Field Connections

  • Ethernet 10/100 RJ45
  • Two Serial RS-485 terminal (up to 115K baud)



  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 150mA @ 12V


  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Physical Dimensions (WxDxH)

  • 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)


LifeCycle Letter PS-QS-1010-xxxx 334,31 kB Zuletzt geändert 11.02.2021
PS-QS-1x10-0780 Datasheet 392,46 kB Zuletzt geändert 28.10.2020
QuickServer Setup Guide 2,84 MB Zuletzt geändert 27.07.2020
FieldServer Toolbox Setup 12,05 MB Zuletzt geändert 27.07.2020
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Zuletzt geändert 11.09.2015
Protocol Driver and Configuration Manual PS-QS-1x10-0780 5,80 MB Zuletzt geändert 03.11.2020
Sample Configurations 40,96 kB Zuletzt geändert 22.12.2017
LifeCycle Letter PS-QS-1510-xxxx 334,32 kB Zuletzt geändert 11.02.2021


Declaration of Conformity (RoHS\CE) 426,18 kB Zuletzt geändert 17.12.2020
Declaration of REACH Compliance 593,33 kB Zuletzt geändert 17.12.2020