Modbus Master/Slave to PROFIBUS DPV1 Master Gateway
5104-MCM-PDPMV1
The ProLinx Modbus Master/Slave to PROFIBUS DPV1 Master gateway creates a powerful connection between devices on a Modbus serial network and PROFIBUS DP slave devices. This stand-alone DIN-rail mounted protocol gateway provides one serial port and one PROFIBUS Master DB9F port.
The Modbus protocol supports both Master and Slave implementations. All Modbus serial ports are individually configurable, providing a choice of Modbus RTU or Modbus ASCII serial protocol support.
The PROFIBUS DPV1 Master protocol supports complete Master specifications according to IEC 61158 Version 1 on either a single or multiple Master network. The gateway offers both cyclic and acyclic data transfers from PROFIBUS DPV1 slaves, as well as cyclic data transfers from DPV0 slaves.
Funktionen und Vorteile
| Powerful network integration |
|
| Modbus slave protocol interface |
|
| PROFIBUS DPV1 Master protocol interface |
|
Applications
The MCM-PDPMV1 gateways are the ideal solution for the many applications where Modbus connectivity can be used to integrate a PROFIBUS DP Slave device into a system. The Modbus Master/Slave gateway is a powerful gateway designed with Client and Server support, enabling easy connection to Rockwell Automation PLCs (CLX, SLC, PLC, CPLX, and similar devices). In combination with the PROFIBUS DP Slave device support, the gateway provides a very powerful interface to the many PROFIBUS devices which are in use in the industrial marketplace today. Applications for the gateway are found in most industries, especially the Manufacturing, Oil and Gas, Electrical Power and Food Processing .
Technische Daten
Internal Database
The ProLinx module contains an internal database that consists of areas for application data, status information, and configuration information.
The internal database is shared between all ports on the module and is used as a conduit to pass information from a device on one network to one or more devices on another network.
Application Data Area
The data area is used to store and retrieve data by the protocol drivers and for data exchange between protocols. The database is used as a source for write commands to remote devices and holds data collected from the remote devices. Commands defined in the configuration file (stored in the configuration data area) control how the data is to be handled in the database.
Status Data Area
This area is used to store error codes, counters, and port status information for each port.
Configuration Data Area
This area contains module configuration information such as port configuration, network information, and command configuration. This configuration file is downloaded to, or uploaded from, this area.
Hardware
| Specification | Description |
| Power Supply |
24 VDC nominal |
| Current Load | 500 mA max @ 32 VDC max |
| Operating Temperature | -4° F to 122° F (-20° C to 50° C) |
| Storage Temperature | -40° F to 185° F (-40° C to 85° C) |
| Relative Humidity | 5% to 95% (with no condensation ) |
| Dimensions |
Standard: |
| LED Indicators |
Power and Module Status |
| Configuration Serial Port |
DB-9M RS-232 only |
| Ethernet Port (Ethernet modules only) |
10Base-T half duplex RJ45 Connector |
| Application Ports |
Modbus Plus Connector |
| Serial Port Isolation |
2500 V RMS port signal isolation per UL 1577 |
| Shipped with Each Unit |
Mini-DIN to DB-9M serial cables |
Downloads
| ProSoft Configuration Builder (PCB) | ||
| MCM PDPMV1 Datasheet | 279,21 kB | Zuletzt geändert 24.08.2016 |
| MCM Driver Manual | 835,78 kB | Zuletzt geändert 10.12.2009 |
| PDPMV1 Protocol Manual | 3,04 MB | Zuletzt geändert 08.02.2017 |
Protokolle
MCM Protocol Specification
The Modbus protocol driver supports Master and Slave implementations of the protocol. All Modbus serial ports are individually configurable, providing a very powerful and flexible host or device interface solution.
Protocol Specifications
The Modbus driver provides extensive support for both the Master and the Slave implementations of the protocol. The serial port(s) on the gateway can be individually configured to support the Modbus protocol (Master or Slave, RTU or ASCII, Baud rate, etc.).
| General Parameters - Modbus Protocol |
|
| Communication parameters |
Baud Rate: 110 to 115K baud |
| Error Checking |
RTU mode (binary) with CRC-16 |
| Floating Point | Floating point data movement supported, including configurable support for Enron implementation |
| Function Codes |
1: Read Output Status |
| Modbus Master |
|
| Command List | Up to 100 command per master port, each fully configurable for function, slave address, register to/from addressing and word/bit count. |
| Polling of command list | Configurable polling of command list, including continuous and on change of data, and dynamically user or automatic enabled. |
| Modbus Slave |
|
| Node address | 1 to 247 (software selectable) |
PDPMV1 Protocol Specification
The module supports complete Master specifications according to IEC 61158. Acyclic parameter data can be transferred with Class 1 or Class 2 DPV1 services, allowing processors to easily communicate with slave devices supporting PROFIBUS DPV0/V1 protocol.
The ProLinx PDPMV1 PROFIBUS Master module acts as a PROFIBUS network scanner, transferring Input and Output data between PROFIBUS devices and the network.
- Master Busview configuration interface via included ProSoft Configuration Builder software (see PSW-PCB)
- Project-unique GSD file import library
- Monitoring and Modification of process data and DPV1 acyclic data
- Multi-drop on a PROFIBUS DPV1 network drop with other compatible devices
- Ability to be used with a repeater as a PROFIBUS Master with PROFIBUS PA slaves on the network
- Automatic project documentation
- Automatic Bus Parameter calculation
- Online slave diagnostics
- Supports all standardized baud rates, up to 12Mbps
- Supports extended diagnostic data (DPV1)
- Auto baud detection at all valid PROFIBUS DPV1 rates
- Multiple modules can be placed in a single rack
- CRC checksum determination of slave configuration consistency to processor
- Master Status LED Indicators for Operations, Network Drop Communication, Master Token-Hold
- FDT/DTM PROFIBUS master transport communication DTM software included (see PSW-CDTM-PDPM)
PROFIBUS Master Specifications
- Up to 125 Slaves can be connected with a repeater
- Up to 1536 cyclic bytes (768 words) input and 1536 bytes (768 words) output data
- Supports Extended Diagnostic Data
- RS-485 optically isolated PROFIBUS Interface with on board DC-DC converter
- Acyclic communications (DPV1), Read and Write
- Alarm Handling (DPV1)
- Supports Sync and Freeze commands
- Supports PROFIdrive 3.1 compliant parameter read and write operations
- Supports Multicast and Broadcast telegrams (DPV1)
PROFIBUS Master Port
- DB-9F Optically Isolated RS-485
- Ready, Run, Error and Token LED Indicators
- PROFIBUS DPV1 RS-485 interface with a 9-pin D shell female connector and isolated Opto-Couplers
Protocol Specifications
The PROFIBUS DP Master protocol driver supports complete Master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.
Zertifikate
| CB Safety | 35,78 kB | Zuletzt geändert 27.08.2012 |
| Declaration of Conformity (RoHS/CE) | 300,10 kB | Zuletzt geändert 04.03.2018 |
| Korean KC Registration | 851,60 kB | Zuletzt geändert 22.02.2013 |
| Russian GOST-R | 7,07 MB | Zuletzt geändert 22.02.2013 |
| GOST-R Declaration of Conformity | 6,68 MB | Zuletzt geändert 22.02.2013 |
| UL/cUL; Class 1, Div 2 | 1,08 MB | Zuletzt geändert 02.07.2013 |
| UL/cUL; Class 1, Div 2 (Canada) | 1,10 MB | Zuletzt geändert 02.07.2013 |