QuickServer LonWorks Ethernet Web

LonWorks QuickServer Gateways

PS-QS-1x11-F

The QuickServer line of communication gateways are designed to link building automation networks utilizing LonWorks with industrial control networks communicating on BACnet/IP, EtherNet/IP, Modbus TCP/IP, and Modbus RTU. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.

QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.

System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.

Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer. 

Abbildungen

Click on image(s) to enlarge
Drag with the mouse. Click for close.

Funktionen und Vorteile

  • Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
  • Multi-configuration capability; specific configurations selectable via DIP switches or software
  • DIN rail mount included with gateway
  • DIP switches to select baud rate or node ID on the fly
  • BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)

Technische Daten

Field Connections

  • Ethernet 10/100 RJ45
  • Serial RS-485 terminal (up to 115K baud)
  • FTT-10 LonWorks port

Other

  • Configuration/Diagnostic utilities
  • Capacity: 250 or 500 Points
  • Table, Wall or DIN rail mount

Approvals

  • TUV approved to UL 916 standard
  • CE Mark
  • BTL Mark (PS-QS-1010)
  • RoHS Compliant
  • FCC Part 15 Compliant

Hardware-Spezifikationen

Environment

  • Operating temperature: -40°F to 167°F (-40°C to 75°C)
  • Relative humidity: 5% to 90% RH, with no condensation

Power Requirements

  • 9 to 30 Vdc or Vac or 5 Vdc
  • Current draw 250mA @ 12V

Physical Dimensions 

  • W x D x H: 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
  • 0.4 lbs (0.2 Kg)

Downloads

PS-QS-1x11-F Datasheet 168,57 kB Zuletzt geändert 09.08.2023
QuickServer Setup Guide 2,84 MB Zuletzt geändert 27.07.2020
FieldServer Toolbox Setup 12,05 MB Zuletzt geändert 27.07.2020
SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) 17,04 MB Zuletzt geändert 11.09.2015
Protocol Driver and Configuration Manual PS-QS-1x11-F 4,70 MB Zuletzt geändert 09.08.2023

Zertifikate

Declaration of Conformity (RoHS\CE) 426,18 kB Zuletzt geändert 17.12.2020
Declaration of REACH Compliance 593,33 kB Zuletzt geändert 17.12.2020
UKCA Certification 327,80 kB Zuletzt geändert 12.05.2022
BACnet Conformance Certificate 720,75 kB Zuletzt geändert 01.03.2024