LonWorks QuickServer Gateways
PS-QS-1x11-F
The QuickServer line of communication gateways are designed to link building automation networks utilizing LonWorks with industrial control networks communicating on BACnet/IP, EtherNet/IP, Modbus TCP/IP, and Modbus RTU. The QuickServer gateways are available with limits of up to 250 or 500 points of application data.
QuickServer, by FieldServer, is a high performance, fully configurable, cost effective Building and Industrial Automation gateway for integrators to easily interface devices to networks in commercial buildings and industrial plants.
System integrators world-wide have benefited from the value of the powerful line of interoperability gateways offered by FieldServer. Now, QuickServer adds to that value by running the same robust FieldServer protocol conversion software on a highly cost effective platform backed by the experience, engineering expertise and proven technical support that integrators have come to expect from ProSoft Technology.
Common combinations of drivers include Modbus RTU, Modbus TCP, BACnet/IP®, BACnet MS/TP, LonWorks® and JCI Metasys® N2. QuickServer is ready to configure for the specific application. All necessary instructions and software are included with QuickServer.
Abbildungen
|
Funktionen und Vorteile
- Ability to interface up to 250 or 500 points of common BAS protocols depending on gateway
- Multi-configuration capability; specific configurations selectable via DIP switches or software
- DIN rail mount included with gateway
- DIP switches to select baud rate or node ID on the fly
- BACnet COV support for fast data communication while reducing the traffic over a BACnet network. BTL Marked (PS-QS-1X10-XXXX) and LonMark Certified (PS-QS-1X11-XXXX)
Technische Daten
Field Connections
- Ethernet 10/100 RJ45
- Serial RS-485 terminal (up to 115K baud)
- FTT-10 LonWorks port
Other
- Configuration/Diagnostic utilities
- Capacity: 250 or 500 Points
- Table, Wall or DIN rail mount
Approvals
- TUV approved to UL 916 standard
- CE Mark
- BTL Mark (PS-QS-1010)
- RoHS Compliant
- FCC Part 15 Compliant
Hardware-Spezifikationen
Environment
- Operating temperature: -40°F to 167°F (-40°C to 75°C)
- Relative humidity: 5% to 90% RH, with no condensation
Power Requirements
- 9 to 30 Vdc or Vac or 5 Vdc
- Current draw 250mA @ 12V
Physical Dimensions
- W x D x H: 4.5 x 3.2 x 1.6 in. (11.5 x 8.3 x 4.1 cm)
- 0.4 lbs (0.2 Kg)
Downloads
| PS-QS-1x11-F Datasheet | 168,57 kB | Zuletzt geändert 09.08.2023 |
| QuickServer Setup Guide | 2,84 MB | Zuletzt geändert 27.07.2020 |
| FieldServer Toolbox Setup | 12,05 MB | Zuletzt geändert 27.07.2020 |
| SlotServer/QuickServer - Legacy Configuration & Debug Software (all products) | 17,04 MB | Zuletzt geändert 11.09.2015 |
| Protocol Driver and Configuration Manual PS-QS-1x11-F | 4,70 MB | Zuletzt geändert 09.08.2023 |
Zertifikate
| Declaration of Conformity (RoHS\CE) | 426,18 kB | Zuletzt geändert 17.12.2020 |
| Declaration of REACH Compliance | 593,33 kB | Zuletzt geändert 17.12.2020 |
| UKCA Certification | 327,80 kB | Zuletzt geändert 12.05.2022 |
| BACnet Conformance Certificate | 1,15 MB | Zuletzt geändert 09.10.2024 |