EtherNet/IP to Siemens Industrial Ethernet
PLX31-EIP-SIE
ProSoft Technology’s EtherNet/IP™ to Siemens® Industrial Ethernet communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled controllers or devices and Siemens® S7 PACs, including S7-200s, S7-300s, S7-400s, S7-1200 and S7-1500 PACs.
In addition, the gateway includes several features, including data prioritization, that allow for simplified integration, reduced commissioning time and optimized performance.
- Abbildungen
- Funktionen und Vorteile
- Technische Daten
- Hardware-Spezifikationen
- Downloads
- Videos
- Zertifikate
Abbildungen
|
Funktionen und Vorteile
- Data prioritization: Multiple I/O connections allow you to set RPIs for status and/or control data, optimizing Ethernet bandwidth.
- Includes an embedded EDS Add-On Profile, allowing for simplified integration and reduced commissioning time.
- Includes a SD card slot (SD card optional) for storing configuration files. This can be used for disaster recovery.
- ProSoft Discovery Service: This utility allows your PC to see the gateway and change its default IP address without being on the same subnet.
- Secure module configuration via module switch (v1.04 and greater).
- Up to 10,000 16-bit registers can be used to exchange large amounts of data.
Technische Daten
EtherNet/IP™ Specifications
| Specification | Description |
| Number of Class 3 Server Connections | 5 |
| Supported PLC Types | PLC2, PLC5, SLC, CLX, CMPLX, MICROLX |
| Supported Message Types | PCCC and CIP |
| Class 3 Client Connections | Connected - 2 Unconnected - 1 |
| Number of Class 1 I/O Connections | 2 |
| I/O connection sizes | 248/248 |
| Max RPI time | 5 ms per connection |
| CIP Services Supported | 0x4C - CIP Data Table Read 0x4D - CIP Data Table Write |
| Command List | Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count. |
| Command Sets | PLC-2/PLC-3/PLC5 Basic Command Set PLC5 Binary Command Set PLC5 ASCII Command Set SLC500 Command Set |
Siemens® Industrial Ethernet Specifications
| Specification | Description |
|
| Supported PLC Data Exchange (Read and Write) | Siemens S7-200, Siemens S7-300, Siemens S7-400, Siemens S7-1200, Siemens S7-1500 |
|
| Supported Register Types | DB, Inputs, Outputs, Flags, Counters, Timers |
|
| Supported Clients | 20 |
|
Hardware-Spezifikationen
Hardware Specifications
| Specification | Description |
| Power Supply |
24 VDC nominal |
| Current Load | 24 VDC nominal @ 300 mA 10 to 36 VDC @ 610 mA maximum |
| Operating Temperature | -25°C to 70°C (-13°F to 158°F) |
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) |
| Shock | IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational) |
| Vibration | IEC 60068-2-6; 5G @ 10 to 150 Hz |
| Relative Humidity | 5% to 95% RH with no condensation |
| Dimensions (H x W x D) | 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm |
| LED Indicators
| Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit |
| Ethernet Port
| 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration |
| Shipped With Each Unit | 2.5 mm screwdriver J180 Power Connector |
Zertifikate
| Declaration of Conformity (ATEX) | 348,50 kB | Zuletzt geändert 28.10.2019 |
| CB Safety | 327,80 kB | Zuletzt geändert 31.03.2020 |
| EtherNet/IP Declaration of Conformity | 86,04 kB | Zuletzt geändert 08.01.2013 |
| Korean KC Registration | 974,32 kB | Zuletzt geändert 07.07.2020 |
| UL/cUL; Class 1, Div 2 | 233,35 kB | Zuletzt geändert 08.04.2019 |
| Declaration of Conformity (RoHS/CE) | 359,34 kB | Zuletzt geändert 18.12.2020 |
| ODVA EtherNet/IP - Declaration of Conformity | 183,48 kB | Zuletzt geändert 09.11.2020 |