PLX32-EIP-PND Product Photo

EtherNet/IP™ to PROFINET® Gateway for dual subnets


The EtherNet/IP to PROFINET device gateway offers bi-directional data transfers between a PROFINET Controller and EtherNet/IP networks. The PLX32-EIP-PND gateway is a stand-alone DIN-rail mounted unit that provides two Ethernet ports, with each port using a different subnet.

The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup. The EtherNet/IP Driver uses Class 1 I/O connections or Class 3 Message instructions. The PROFINET driver operates as a PROFINET Class A device.

A conformal coating option is available for this product.


Click on image(s) to enlarge
Drag with the mouse. Click for close.

Funktionen und Vorteile

  • ODVA Approved
  • PROFINET v2 certification with PROFINET Class A compliance
  • EtherNet/IP and PROFINET certifications ensure the device is compatible with their respective network
  • Field-tested with multiple PROFINET controllers from multiple vendors
  • Remotely view and diagnose EtherNet/IP and PROFINET networks
  • Embedded EDS AOP provided to allow for seamless integration to Studio 5000 and RSLogix 5000
  • Using EtherNet/IP I/O connections, no ladder programming is required
  • Multiple I/O connections to allow for increased throughput
  • Secure module configuration via module switch (v1.04 and greater)
  • Up to 10,000 16-bit registers can be used to exchange large amounts of data

Technische Daten

EtherNet/IP™ Specifications



Number of Class 3 Server Connections


Supported PLC Types


Supported Message Types


Class 3 Client Connections

Connected - 2

Unconnected - 1

Number of Class 1 I/O Connections


I/O connection sizes in/out

496/496 bytes

Max RPI time

5 ms per connection

CIP Services Supported

0x4C - CIP Data Table Read

0x4D - CIP Data Table Write

Command List

Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count.

Command Sets

PLC-2/PLC-3/PLC5 Basic Command Set

PLC5 Binary Command Set

PLC5 ASCII Command Set

SLC500 Command Set


PROFINET Specifications




Driver Type

Class A Device


1440 bytes IN, 1440 bytes OUT

Exchange Types

Cyclic Real-time (RT) and Acyclic Data





Power Supply

24 VDC nominal
10 to 36 VDC allowed
Positive, Negative, GND Terminals

Current Load

24 VDC nominal @ 300 mA

10 to 36 VDC @ 610 mA maximum

Operating Temperature

-25°C to 70°C (-13°F to 158°F)

Storage Temperature

-40°C to 80°C (-40°F to 176°F)

Relative Humidity

5% to 95% RH with no condensation


IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)

IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operation)


IEC 60068-2-6; 5G @ 10Hz to 150Hz

 (H x W x D)

5.38 x 1.99 x 4.38 in
13.67 x 5.05 x 11.13 cm

Ethernet Ports (2)


10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
 Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration

Shipped With Each Unit

2.5 mm screwdriver
J180 Power Connector


ODVA EtherNet/IP - Declaration of Conformity 183,48 kB Zuletzt geändert 09.11.2020
Profibus/Profinet Certificate 63,17 kB Zuletzt geändert 18.10.2018
ATEX Letter of Conformity 107,32 kB Zuletzt geändert 12.05.2022
Korean KC Registration 974,32 kB Zuletzt geändert 07.07.2020
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1,92 MB Zuletzt geändert 10.07.2020
Declaration of Conformity (RoHS/CE) 114,24 kB Zuletzt geändert 01.06.2022
Declaration of REACH Compliance 145,49 kB Zuletzt geändert 01.06.2022
CB Safety 348,30 kB Zuletzt geändert 20.10.2022
UL Certificate of Compliance 233,35 kB Zuletzt geändert 16.11.2022