-
Solutions
- Amusement
- Automated Material Handling
- Automotive
- IIoT Solutions
-
Modbus® TCP/IP to PROFINET® Device Gateway - PLX31-MBTCP-PND
PLX31-MBTCP-PND
The Modbus TCP/IP to PROFINET device gateway offers bi-directional data transfer between a PROFINET Controller and Modbus TCP/IP networks. The Modbus TCP/IP driver uses multiple clients and servers for faster data throughput. The PROFINET driver operates as a PROFINET device (slave).
The PLX31-MBTCP-PND gateways are stand-alone DIN-rail mounted units that provide one Ethernet port for communications, remote configuration, and diagnostics. The onboard SD Card slot (SD card optional) is used for storing configuration files that can be used for recovery, transferring the configuration to another gateway, or general configuration backup.
Abbildungen
Click on image(s) to enlarge
Funktionen und Vorteile
- PROFINET v2 certification with PROFINET class A compliance
- Field-tested with multiple Modbus TCP/IP devices, and PROFINET controllers from multiple vendors
- Remotely view and diagnose Modbus TCP/IP and PROFINET networks
- Remote configuration via the free, intuitive, ProSoft Configuration Builder (PCB) software
- Multiple, simultaneous Modbus TCP/IP client and/or server connections to allow for increased throughput
- Secure module configuration via module switch (v1.04 and greater)
- Up to 10,000 16-bit registers can be used to exchange large amounts of data.
Technische Daten
Modbus TCP/IP Specifications
Supported Modbus Function Codes
1: Read Coil Status
2: Read Input Status
3: Read Holding Registers
4: Read Input Registers
5: Force (Write) Single Coil
6: Preset (Write) Single Holding Register
15: Force (Write) Multiple Coils
16: Preset (Write) Multiple Holding Registers
22: Mask Write Holding Register (server only)
23: Read/Write Holding Registers (server only)
Supported clients
10
Supported servers
MBAP = 5, Encapsulated = 5
Command List
Up to 160 fully configurable client commands
Status Data
Error codes reported individually for each command
Command List Polling
Each command can be individually enabled or disabled; write-only-on-data-change is available
PROFINET Specifications
Specification
Description
Driver Type
Class A Device
PROFINET I/O Data
1440 bytes IN, 1440 bytes OUT
Exchange Types
Cyclic Real-time (RT) and Acyclic Data
Hardware Specifications
Specification
Description
Power Supply
24 VDC nominal
10 to 36 VDC allowed
Positive, Negative, GND TerminalsCurrent Load
24 VDC nominal @ 300 mA
10 to 36 VDC @ 610 mA maximum
Operating Temperature
-25°C to 70°C (-13°F to 158°F )
Storage Temperature
-40°C to 80°C (-40°F to 176°F )
Relative Humidity
5% to 95% RH with no condensation
Shock
IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational)
IEC 60068-2-27; 30G @ 18ms, 3-Axis (Non-Operational)
Vibration
IEC 60068-2-6; 5G @ 10 to 150 Hz
Dimensions
(H x W x D)5.38 x 1.99 x 4.38 in
13.67 x 5.05 x 11.13 cmLED Indicators
*Configuration (CFG)
*Error (ERR) Status*Power (PWR)
*Hardware Fault (FLT)
*Network Status (NS) Modbus TCP/IP Class I or Class III -Connection Status (Modbus TCP/IP only)
*Module Status (MS) Module Configuration Status
(Modbus TCP/IP only)
*Ethernet Communication Port Link/Activity and 100mbitEthernet Port
*10/100Mbit RJ45 Connector Electrical Isolation 1500 Vrms at 50 Hz to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991
*Ethernet Broadcast Storm Resiliency = less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes durationShipped With Each Unit
2.5 mm screwdriver, J180 Power Connector
Zertifikate
ATEX Letter of Conformity 107,32 kB Zuletzt geändert 12.05.2022 CB Safety 348,30 kB Zuletzt geändert 20.10.2022 Korean KC Registration 974,32 kB Zuletzt geändert 07.07.2020 PROFINET Certificate 251,39 kB Zuletzt geändert 10.03.2025 Declaration of Conformity (RoHS/CE) 114,24 kB Zuletzt geändert 01.06.2022 UL Certificate of Compliance 233,35 kB Zuletzt geändert 16.11.2022 Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) 1,92 MB Zuletzt geändert 10.07.2020