The ProSoft Technology Radiating Cable is specially designed to radiate 802.11g and 802.11n RF signals operating in the spread spectrum 2.4 GHz band.
Acting as a long, flexible antenna, the Radiating Cable may be installed along monorail systems, overhead cranes and through tunnels to propagate wireless data signals in situations tough for traditional antenna systems.
Specially tested with ProSoft Technology 802.11 Fast Industrial Hotspots utilizing Fast Roam Technology, the Radiating Cable product line offers reliable and flexible options in challenging RF environments.
Size |
1.27 cm (0.5 in) |
Frequency Range |
Up to 2.9 GHz |
Jacket |
Halogen-free low smoke flame retardant |
Slot Design |
Groups of slots at short intervals |
Indication of Slot Alignment |
Sheath marking (180º) |
Impedance |
50 Ohm |
Typical Attenuation |
7.32 dB/100 m (2.22 dB/100 ft) |
Velocity Ratio |
88% |
Capacitance |
76 pF/m |
Dielectric Material |
Cellular polyethylene |
Diameter Inner Conductor |
4.8 mm (0.19 in) |
Diameter Dielectric |
12.4 mm (0.49 in) |
Diameter over Jacket |
15.5 mm (0.61 in) |
Minimum Bending Radius (single bend) |
200 mm (7.87 in) |
Recommended Hanger/Clamp Interval |
One per meter (3.3 ft) |
Storage Temperature |
-70 to +85ºC (-94 to +185ºF) |
Installation Temperature |
-25 to +60ºC (-13 to +140ºF) |
Operating Temperature |
-40 to +85ºC (-40 to +185ºF) |
RCLB-xxxM Datasheet | 223,77 kB | Zuletzt geändert 01.04.2014 |
Radiating Cable Installation Guide | 4,70 MB | Zuletzt geändert 11.03.2020 |