In-Line Lightning Protector for Cellular Antennas
LP-901
The LP-901 Lightning Protector is designed to provide multi-strike direct current (dc) voltage-blocking lightning protection for antennas operating between 698 MHz and 2.7 GHz, including 3G/4G/LTE cellular antennas. The LP-901 lightning protector is designed for use inside an enclosure with the bulkhead fitting side protruding through to the outside of the enclosure. The connectors are a standard N female on the protected side to a standard N female bulkhead on the surge side. The bulkhead fitting can be connected to any standard N-type connector extension cable.
Funktionen und Vorteile
- Bi-directional operation
- High surge current capability
- Low let-through voltage and throughput energy
- DC shorted filter design, no DC continuity between center pins
- Ideal use for applications where DC is not required on the coaxial cable
- Fully weatherized housing
- Elongated female connector allows for mounting through a 1/4” bulkhead or grounding bar
- Multi-strike capability
Anwendungen
The LP-901 Lightning Protector is designed to provide protection for 900MHz wireless systems and 3G/4G/LTE cellular systems with low RF loss and excellent surge protection
Hardware-Spezifikationen
| Specification |
Description |
| Protected Side Connector |
N Female Bulkhead |
| Surge Side Connector |
N Female Bulkhead |
| RF Power |
500 W / 750 W (at 50°C) |
| Frequency Range |
698 to 2700 MHz |
| Voltage Standing Wave Ratio (VSWR) |
≤ 1.1:1 |
| Insertion Loss |
≤ 0.1 dB |
| Operating / Storage Temperature |
-50°C to +85°C |
Agency Approvals & Certifications
| IEC 60529 IP67 |
| Bellcore # TA-NWT-00487 Procedure 4.11, wind driven |
| RoHS compliant |
Downloads
| LP-901 - Datasheet | 312,29 kB | Zuletzt geändert 14.09.2017 |