 
			  		 
		 
		 
	
						
			
			
						
		ProSoft Technology’s EtherNet/IP™ to ASCII communication gateway allows high-speed bi-directional data transfers between EtherNet/IP™-enabled PACs and ASCII devices such as weigh scales and barcode readers. The EtherNet/IP™ protocol driver supports the explicit messaging implementation. The gateway is user-configurable as both a client and a server.
EtherNet/IP™ PACs include Rockwell Automation® ControlLogix® and CompactLogix™, as well as several Schneider Electric® controllers. Applications for this module are found in most industries, especially manufacturing, oil & gas, electrical power and food processing.
The gateway has several features that allow for simplified integration, reduced commissioning time and optimized performance.
EtherNet/IP™ Specifications
| Specification | Description | 
| Number of Class 3 Server Connections | 5 | 
| Supported PLC Types | PLC2, PLC5, SLC, CLX, CMPLX, MICROLX | 
| Supported Message Types | PCCC and CIP | 
| Class 3 Client Connections | 
Connected: 2 | 
| Number of Class 1 I/O Connections | 1 | 
| I/O connection sizes | 248/248 | 
| Max RPI time | 5 ms per connection | 
| CIP Services Supported | 
0x4C - CIP Data Table Read | 
| Command List | Support for 100 commands per Client, each configurable for command type, IP address, register to/from addressing and word/bit count | 
| Command Sets | 
PLC-2/PLC-3/PLC5 Basic Command Set | 
ASCII Specifications
| Transmit and Receive Buffer Size | 255 byte Transmit character length with 0 to 65535 millisecond delay between each transmitted character | 
| Specification | Description | 
| Power Supply | 24 VDC nominal 10 to 36 VDC allowed Positive, Negative, GND Terminals | 
| Current Load | 
24 VDC nominal @ 300 mA | 
| Operating Temperature | -25°C to 70°C (-13°F to 158°F) | 
| Storage Temperature | -40°C to 80°C (-40°F to 176°F) | 
| Shock | 
IEC 60068-2-27; 15G @ 11ms, 3-Axis (Operational) | 
| Vibration | IEC 60068-2-6; 5G @ 10 to 150 Hz | 
| Relative Humidity | 5% to 95% RH with no condensation | 
| Dimensions (H x W x D) | 5.38 x 1.99 x 4.38 in 13.67 x 5.05 x 11.13 cm | 
| LED Indicators | Configuration (CFG), Error (ERR), Power (PWR), Hardware Fault (FLT), Network Status (NS), EtherNet/IP™ Class I or Class III Connection Status (EtherNet/IP Only) Module Status (MS), Module Configuration Status (EtherNet/IP Only) Ethernet Communication Port Link/Activity, and 100 mbit Serial Communication Port Receive (RX) and Transmit (TX) | 
| Ethernet Port | 10/100Mbit half-duplex RJ45 Connector Electrical Isolation 1500 Vrms at 50 to 60 Hz for 60 seconds, applied as specified in section 5.3.2 of IEC 60950: 1991 Ethernet Broadcast Storm Resiliency is less than or equal to 5000 [ARP] frames-per-second and less than or equal to 5 minutes duration | 
| Number of Serial Ports | 1 | 
| Serial Port Isolation | 2500 Vrms port signal isolation per UL 1577 serial port communication signal uses RF (Radio Frequency) modulation signal as isolation media, IC chip model is SiliconLabs Si844x (Si8440,Si8441,Si8442) | 
| Shipped With Each Unit | 
2.5 mm screwdriver | 
| ATEX Letter of Conformity | 107,32 kB | Zuletzt geändert 12.05.2022 | 
| CB Safety | 348,30 kB | Zuletzt geändert 20.10.2022 | 
| Korean KC Registration | 974,32 kB | Zuletzt geändert 07.07.2020 | 
| UL Certificate of Compliance | 233,35 kB | Zuletzt geändert 16.11.2022 | 
| Declaration of Conformity (RoHS/CE) | 114,24 kB | Zuletzt geändert 01.06.2022 | 
| ODVA EtherNet/IP - Declaration of Conformity | 135,50 kB | Zuletzt geändert 13.10.2025 | 
| Country Approval - Eurasian Customs Union Conformity (EAC) (Wired) | 1,92 MB | Zuletzt geändert 10.07.2020 | 
| Declaration of REACH Compliance | 145,49 kB | Zuletzt geändert 01.06.2022 |