Distributed Network Protocol (DNP3) Gateway
PLX51-DNPS
The PLX51-DNPS gateways provide intelligent routing between DNP3 (Distributed Network Protocol) and either EtherNet/IP™ or Modbus® protocols. The gateways support Ethernet and Serial communications.
PLX51-DNPS gateway is the DNP3 Outstation or Slave.
The PLX51-DNPS allows the user to integrate DNP3 devices over a secure link into a Logix system with minimal effort. No copying or mapping of data in the Logix controller is required as the PLX51-DNPS writes directly into Logix tags.
The PLX51-DNPS allows users to integrate the gateway into a Modbus TCP/IP or serial network. The gateway supports Modbus TCP/IP Client and Server and Modbus RTU protocols.
The PLX51-DNPS module provides DNP3 Secure Authentication 5 which enables the user to connect DNP3 devices to a Logix platform securely. The module also provides a range of diagnostics, statistics and a DNP3 traffic analyzer to assist with fault-finding.
Abbildungen
Drag with the mouse. Click for close.
|
Drag with the mouse. Click for close.
|
Drag with the mouse. Click for close.
|
Drag with the mouse. Click for close.
|
Funktionen und Vorteile
- Support DNP3 Secure v5
- Supports EtherNet/IP, Modbus Master and Slave protocols (TCP/IP and RTU)
- Supports DLR for EtherNet/IP Networks
- On board storage for 900,000 DNP3 Events
- Support for unsolicited reporting
- Disaster recovery via the microSD Card
- DNP3 Level 3 compliant
Konfiguration
The PLX50 Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the PLX51-DNPS gateway, connections with controllers and devices.
Technische Daten
DNP3 Specifications
| Mode Supported
|
Slave
|
|
Application Functions
Supported
|
Read
Write
Select Before Operate
Direct-Operate
Direct-Operate-No-Response
Authentication Request and Response
Unsolicited Response
|
| DNP3 Secure Authentication
|
Yes (v5)
|
| DNP3 Events Supported
|
Yes
|
| DNP3 Class Supported
|
0, 1, 2, 3
|
| DNP3 Groups and Variations
|
Yes (see manual and Device profile document)
|
| DNP3 Unsolicited Responses
|
Yes
|
| DNP3 Time Sync
|
Yes
|
| DNP3 Objects*
|
Binary, 16-bit Analog, 32-bit Analog
|
| Event Buffer
|
900,000 (100,000 per DNP3 Group)
|
| DNP3 Secure Authentication**
|
Pre-shared key change method supported
AES-128 and AES-256 Key Wrap Algorithms supported
HMAC-SHA-1, HMAC-SHA-256, AES-GMAC MAC Algorithms supported
Aggressive Mode supported
|
*Please refer to the DNP Slave Device Profile document and product manual for a full list of all supported functions.
**Please refer to the product manual for a detailed description on DNP3 Secure Authentication v5 .
EtherNet/IP Specifications
| Connector
|
RJ45
|
| Conductors
|
CAT5 STP/UTP
|
| ARP Connections
|
Max 250
|
| TCP Connections
|
Max 250
|
| CIP Connections
|
Max 10
|
| Communications Rate
|
10.100 Mbps
|
| Duplex Mode
|
Full / Half / Auto Negotiate
|
| Auto MDIX
|
Yes
|
| Embedded Switch
|
Yes, 2 x Ethernet ports
|
Modbus Specifications
| Mode
|
Client or Server
|
| Connector
|
RJ45
|
| Conductors
|
CAT5 STP/UTP
|
| ARP Connections
|
Max 40
|
| TCP Connections
|
Max 40
|
| Communications Rate
|
10.100 Mbps
|
| Duplex Mode
|
Full / Half / Auto Negotiate
|
| Auto MDIX
|
Yes
|
Hardware-Spezifikationen
Physical
| Enclosure Rating
|
IP20, NEMA/UL Open Type, DIN Rail
Indoor-Use Only
|
| Dimensions (H x W x D)
|
5.86 x 1.33 x 4.56 in
149 x 34 x 116 mm
|
| Ethernet Port
|
(2) 10/100 Base-T, RJ45 connector
|
| Serial Port
|
(2) RS232, RS485 (9-way terminal)
|
| USB
|
(1) USB2.0, Type A
Recommended USB Cable: Type-A (male) to Type-B (male)
|
| microSD Card
|
Yes
|
Electrical
| Power
|
Input: 10 – 32V DC, (121 mA @ 24 VDC)
|
| Power Consumption
|
3.1 W (Including full load on USB of 200mA)
300 mA maximum
|
| USB Power
|
5V, maximum load of 200 mA (1W)
|
| Connector
|
3-way terminal
|
| Earth connection
|
Yes, terminal based
|
Environmental
| Operating Temperature
|
IEC 60068 -4°F to +158°F (-20°C to +70°C)
|
| Relative Humidity
|
IEC 60068-30 5% to 95%, with no condensation
|
| Altitude
|
<2000 m
|
Hardware
| Earth Connection
|
Yes, terminal based
|
| Emissions
|
IEC61000-6-4
|
| ESD Immunity
|
EN 61000-4-2
|
| Radiated Immunity
|
IEC 61000-4-3
|
| EFT/B Immunity
|
IEC61000-4-4
|
| Surge Immunity
|
IEC61000-4-5
|
| Conducted RF Immunity
|
IEC 61000-4-6
|
Zertifikate
|
Declaration of REACH Compliance
|
128,14 kB
|
Zuletzt geändert 16.11.2022 |
|
ATEX Letter of Conformity
|
48,38 kB
|
Zuletzt geändert 12.05.2022 |
|
ODVA EtherNet/IP Declaration of Conformity
|
135,16 kB
|
Zuletzt geändert 15.10.2020 |
|
UL/cUL; Class 1, Div2
|
407,26 kB
|
Zuletzt geändert 15.10.2020 |
|
CB Safety
|
346,21 kB
|
Zuletzt geändert 27.04.2022 |
|
Declaration of Conformity (RoHS/CE)
|
139,57 kB
|
Zuletzt geändert 16.11.2022 |
|
Country Approval - Aus/NZ - ACMA Declaration
|
133,59 kB
|
Zuletzt geändert 15.10.2020 |
|
Country Approval - Korea - KC Registration
|
281,71 kB
|
Zuletzt geändert 12.05.2022 |
|
Country Approval - Eurasian Customs Union Conformity (EAC) (Wired)
|
1,92 MB
|
Zuletzt geändert 10.07.2020 |
|
Korean KC Registration
|
281,71 kB
|
Zuletzt geändert 28.04.2022 |
