Distributed Network Protocol (DNP3) Gateway
PLX51-DNPS
The PLX51-DNPS gateways provide intelligent routing between DNP3 (Distributed Network Protocol) and either EtherNet/IP™ or Modbus® protocols. The gateways support Ethernet and Serial communications.
PLX51-DNPS gateway is the DNP3 Outstation or Slave.
The PLX51-DNPS allows the user to integrate DNP3 devices over a secure link into a Logix system with minimal effort. No copying or mapping of data in the Logix controller is required as the PLX51-DNPS writes directly into Logix tags.
The PLX51-DNPS allows users to integrate the gateway into a Modbus TCP/IP or serial network. The gateway supports Modbus TCP/IP Client and Server and Modbus RTU protocols.
The PLX51-DNPS module provides DNP3 Secure Authentication 5 which enables the user to connect DNP3 devices to a Logix platform securely. The module also provides a range of diagnostics, statistics and a DNP3 traffic analyzer to assist with fault-finding.
- Abbildungen
- Funktionen und Vorteile
- Konfiguration
- Technische Daten
- Hardware-Spezifikationen
- Downloads
- Zertifikate
Abbildungen
|
|
|
|
Funktionen und Vorteile
- Support DNP3 Secure v5
- Supports EtherNet/IP, Modbus Master and Slave protocols (TCP/IP and RTU)
- Supports DLR for EtherNet/IP Networks
- On board storage for 900,000 DNP3 Events
- Support for unsolicited reporting
- Disaster recovery via the microSD Card
- DNP3 Level 3 compliant
Konfiguration
The PLX50 Configuration Utility software is used for configuration and troubleshooting of the module. The stand-alone configuration utility allows users to define the setup and configuration of the PLX51-DNPS gateway, connections with controllers and devices.
Technische Daten
DNP3 Specifications
| Mode Supported |
Slave |
|
Application Functions |
Read |
| DNP3 Secure Authentication |
Yes (v5) |
| DNP3 Events Supported |
Yes |
| DNP3 Class Supported |
0, 1, 2, 3 |
| DNP3 Groups and Variations |
Yes (see manual and Device profile document) |
| DNP3 Unsolicited Responses |
Yes |
| DNP3 Time Sync |
Yes |
| DNP3 Objects* |
Binary, 16-bit Analog, 32-bit Analog |
| Event Buffer |
900,000 (100,000 per DNP3 Group) |
| DNP3 Secure Authentication** |
Pre-shared key change method supported |
*Please refer to the DNP Slave Device Profile document and product manual for a full list of all supported functions.
**Please refer to the product manual for a detailed description on DNP3 Secure Authentication v5 .
EtherNet/IP Specifications
| Connector |
RJ45 |
| Conductors |
CAT5 STP/UTP |
| ARP Connections |
Max 250 |
| TCP Connections |
Max 250 |
| CIP Connections |
Max 10 |
| Communications Rate |
10.100 Mbps |
| Duplex Mode |
Full / Half / Auto Negotiate |
| Auto MDIX |
Yes |
| Embedded Switch |
Yes, 2 x Ethernet ports |
Modbus Specifications
| Mode |
Client or Server |
| Connector |
RJ45 |
| Conductors |
CAT5 STP/UTP |
| ARP Connections |
Max 40 |
| TCP Connections |
Max 40 |
| Communications Rate |
10.100 Mbps |
| Duplex Mode |
Full / Half / Auto Negotiate |
| Auto MDIX |
Yes |
Hardware-Spezifikationen
Physical
| Enclosure Rating |
IP20, NEMA/UL Open Type, DIN Rail |
| Dimensions (H x W x D) |
5.86 x 1.33 x 4.56 in |
| Ethernet Port |
(2) 10/100 Base-T, RJ45 connector |
| Serial Port |
(2) RS232, RS485 (9-way terminal) |
| USB |
(1) USB2.0, Type A |
| microSD Card |
Yes |
Electrical
| Power |
Input: 10 – 32V DC, (121 mA @ 24 VDC) |
| Power Consumption |
3.1 W (Including full load on USB of 200mA) |
| USB Power |
5V, maximum load of 200 mA (1W) |
| Connector |
3-way terminal |
| Earth connection |
Yes, terminal based |
Environmental
| Operating Temperature |
IEC 60068 -4°F to +158°F (-20°C to +70°C) |
| Relative Humidity |
IEC 60068-30 5% to 95%, with no condensation |
| Altitude |
<2000 m |
Hardware
| Earth Connection |
Yes, terminal based |
| Emissions |
IEC61000-6-4 |
| ESD Immunity |
EN 61000-4-2 |
| Radiated Immunity |
IEC 61000-4-3 |
| EFT/B Immunity |
IEC61000-4-4 |
| Surge Immunity |
IEC61000-4-5 |
| Conducted RF Immunity |
IEC 61000-4-6 |
Zertifikate
| Country Approval - Aus/NZ - ACMA Declaration | 133,59 kB | Zuletzt geändert 15.10.2020 |
| Ex Certificate (ATEX Directive) | 48,38 kB | Zuletzt geändert 15.10.2020 |
| ODVA EtherNet/IP Declaration of Conformity | 135,16 kB | Zuletzt geändert 15.10.2020 |
| UL/cUL; Class 1, Div2 | 407,26 kB | Zuletzt geändert 15.10.2020 |
| CB Safety | 346,21 kB | Zuletzt geändert 15.10.2020 |
| Declaration of Conformity (RoHS/CE) | 444,37 kB | Zuletzt geändert 18.12.2020 |
| Declaration of REACH Compliance | 342,00 kB | Zuletzt geändert 08.02.2021 |