ControlNet Fiber Repeater
A-CFR
The A-CFR ControlNet Fiber Repeater extends the length of a network for a point-to-point topology while performing network media conversion from copper to fiber, and from fiber to copper.
The A-CFR can be used when a medium-distance fiber link between two ControlNet products is needed. The fiber link provides isolation between nodes and is less susceptible to a noisy environment than copper media.
Abbildungen
|
|
|
Funktionen und Vorteile
- A pair of A-CFR modules can be used to physically extend a ControlNet network by up to 3 km (1.86 miles) using standard industrial multi-mode fiber.
- Supports Redundant ControlNet applications by duplicating the setup.
- Supports common industrial fiber cables:
- OM1 - 62.5/125 μm
- OM2 - 50/125 μm
- Wide operating voltage 10 to 32 VDC
- Small form factor – DIN rail mounted
Technische Daten
ControlNet Fiber
| Specification |
Description |
| Connectors |
2 x ST-Type connectors (FO-Tx and FO-Rx) |
| Wavelength |
820 nm |
| Transmission Mode |
Multi-mode |
| Supported Fiber Cables |
OM1: 62.5/125 µm |
| Maximum Distance |
3000 m |
|
Transmit Power (at |
OM1: 62.5/125 µm
OM2: 50/125 µm |
| Optical Budget |
13.0 dB (for OM1 - 62.5/125 µm) |
Hardware-Spezifikationen
| Specification |
Description |
| Power Supply |
Input: 10 to 32 VDC, (70 mA @ 24 VDC) |
| Power Consumption |
1.7 W (max) |
| Dimensions (H x W x D) |
148.0 x 34.0 x 116.0 mm |
| Connector |
3-way terminal |
| Conductors |
24 to 18 AWG |
| Enclosure Rating |
IP20, NEMA/UL Open Type |
| Temperature |
0 to 70 °C |
| Earth Connection |
Yes, terminal based |
| Emissions |
IEC 61000-6-4 |
| ESD Immunity |
EN 61000-4-2 |
| Radiated RF Immunity |
IEC 61000-4-3 |
| EFT/B Immunity |
EFT: IEC 61000-4-4 |
| Surge Immunity |
Surge: IEC 61000-4-5 |
| Conducted RF Immunity |
IEC 61000-4-6 |