EtherNet/IP™ to DH+ Gateway
What do you need help with?
How can I edit the backplane exchange size on the MVI56-ADM?
. The last argument of the these two functions (MVIcip_WriteConnected and MVIcip_ReadConnected) is the dataSize argument in size of bytes. The detail on how to use these two functions can be found on page 273
Erfahren Sie mehrMy ControlNet network shows a maximum usage value of 99.61% when an MVI56-XXX or MVI56E-XXX is in the rack, why is this?
if it is at 100% peak and average so RA recommends that you keep the average in the 50-70% range. A 1756-CN2/B has plenty of CPU power so it could be at 99% peak and average with no issues (other than you cannot
Erfahren Sie mehrHow do I convert an integer to floating point and vice versa in a Rockwell Controller?
statement that dictates the Length parameter. A Length of '1' means the logic will use 2 consecutive integers starting at MCM.DATA.ReadData[0] to create a single floating point, or “REAL” data tag. Not all
Erfahren Sie mehrI am using a ProSoft MVI46 solution and I am getting a Fault Message that says, "Specialty I/O Module in Slot x has not responded within the time limit." What can cause this?
is still on, the module must be returned to ProSoft for repair. The battery is NOT user-replacable in the field. 2. Check the Setup Jumper. Be sure it is installed on only one of the two pins
Erfahren Sie mehrHow does one autostart an application in the appsrvce?
? --- This is considerably different and a bit more complicated than on the x86 & x64 Windows platforms, more information can be found on the msdn web site; "Developing an OEM Adaptation Layer", http://msdn2.microsoft
Erfahren Sie mehr