EtherNet/IP™ to DH+ Gateway
What do you need help with?
Why won't my ProSoft MVI module go into Setup Mode even though I have installed the Setup Jumper and restarted the module?
the setup jumper and restarting the module, I still see activity on p2 or p3 leds, as if the module is still in normal operating mode. My MVI flash update utility does not connect to the module, even after I
Erfahren Sie mehrHow do I get the letters of my ASCII text messages to be in the correct order?
1 transmit swap code", "port 2 receive swap code" and "port 2 transmit swap code" parameters in the configuration data. Setting any or all of these to a value of "0" perserves the byte order. Setting
Erfahren Sie mehrIs it possible to configure an AFC flow computer solutions to use the ISO 6976 computation standard?
perform and avoid the need for machine computation (programmed computer). On the other hand, AGA 8 lists the coefficients of a second-degree (order 2, quadratic) polynomial for Cp over temperature
Erfahren Sie mehrAre there any known problems using RSLogix500, versions 7.1, 7.2 or 7.3 with ProSoft's 3250-L532M SLC 5/03 RTU processor?
Yes! Allen-Bradley has released information regarding a problem that arises in RSLogix500, versions 7.1, 7.2 and 7.3, when you try to use the "Read I/O Config" feature or when you download ... Are there any known problems using RSLogix500, versions 7.1, 7.2 or 7.3 with ProSoft's 3250-L532M SLC 5/03 RTU processor?
Erfahren Sie mehrDo ProSoft CompactLogix modules work with the new CompactLogix processors?
The requirements for Prosoft's CompactLogix InRAx modules are: * 1769 I/O bus * 450-800ma @5v from the bus, depending on the MVI module * Placement within 2-4 slots of a CompactLogix power supply ... CompactLogix, L1, L2, L3, 1769, Distance Rating
Erfahren Sie mehr