EtherNet/IP™ to DH+ Gateway
What do you need help with?
What is the Mean Time Between Failure (MBTF) for the RLX2-IHA?
The Mean Time Between Failure (MBTF) for the RLX2-IHA is 219,000 Hours. ... What is the Mean Time Between Failure (MBTF) for the RLX2-IHA?
Erfahren Sie mehrWhat is the Mean Time Between Failure (MBTF) for the RLX2-IHG?
The Mean Time Between Failure (MBTF) for the RLX2-IHG is 560,640 Hours. ... What is the Mean Time Between Failure (MBTF) for the RLX2-IHG?
Erfahren Sie mehrWhat is the Mean Time Between Failure (MBTF) for the RLX2-IHW?
The Mean Time Between Failure (MBTF) for the RLX2-IHW is 1,343,200 Hours. ... What is the Mean Time Between Failure (MBTF) for the RLX2-IHW?
Erfahren Sie mehrWhat is the Mean Time Between Failure (MBTF) for the RLX2-IHNF?
The Mean Time Between Failure (MBTF) for the RLX2-IHNF radio is 1,360,720 Hours. ... What is the Mean Time Between Failure (MBTF) for the RLX2-IHNF?
Erfahren Sie mehrWhat are common things that prevent reliable DH+ communications on the AN-X(2)-AB-DHRIO gateway running the DH+ Bridge FW?
If the NS or NET LED is not solid green then check the recommendations below: 1) For networks running at 57k6 or 115k2 bauds it is necessary to have 150 ohm resistors on each end of the network ... DHP, DH+, NS LED, NET LED, AN-X2-AB-DHRIO, ... What are common things that prevent reliable DH+ communications on the AN-X(2)-AB-DHRIO gateway running the DH+ Bridge FW?
Erfahren Sie mehr