EtherNet/IP™ to DH+ Gateway
What do you need help with?
What kind of radio frequencies does ProSoft offer?
ProSoft offers 900MHz, 2.4GHz, 5GHz, and Cellular (GSM/CDMA) frequency solutions
Erfahren Sie mehrHow do I figure out which lighting protector I need?
It usually depends on the frequency you are using. If you're using 900MHz, you will use LP-901 If you're using 2.4GHz or 5GHz, you will typically use LP-25001 There is exceptions when using 2
Erfahren Sie mehrI just powered up my ICX30-HWC, how do I access it?
address of the ICX30 to load up the default login page. Login with the default credentials of ADMIN and PASSWORD, and you are ready to configure your ICX30!
Erfahren Sie mehrWhat is the difference between LMR® 400 and LMR® 600 cable?
LMR® 600 is a thicker cable than the LMR® 400. You typically use LMR® 400 when going runs from 5ft to 40ft. Anything 50ft and above, you want to use LMR® 600. Because the cables will add loss
Erfahren Sie mehrHow can I use an AN-X2-AB-DHRIO to allow a SLC5/04 on DH+ to talk to a Panel View Plus on EtherNet/IP
There are currently special restrictions on communicating with a SLC5/04 via DH+ with a Panel View Plus using EtherNet/IP through our AN-X2-AB-DHRIO, please see the attached tech-note for full ... How can I use an AN-X2-AB-DHRIO to allow a SLC5/04 on DH+ to talk to a Panel View Plus on EtherNet/IP
Erfahren Sie mehr