Two-Port Building Automation Gateway
What do you need help with?
Can a CompactLogix processor be used with the AN-X(2) Remote I/O Scanner?
Yes as long as the CompactLogix has an ethernet port available with a minimum of 2 CIP connections it can be used in conjunction with the AN-X(2)-AB-DHRIO gateway running the Remote I/O Scanner ... Can a CompactLogix processor be used with the AN-X(2) Remote I/O Scanner?
Erfahren Sie mehrHow do I configure an AN-X(2) Remote I/O Scanner?
The attached document provides a sample on how to configure the Remote I/O Scanner for an application on the AN-X-AB-DHRIO or the AN-X2-AB-DHRIO. ... The attached document provides a sample on how to configure the Remote I/O Scanner for an application on the AN-X-AB-DHRIO or the AN-X2-AB-DHRIO. ... How do I configure an AN-X(2) Remote I/O Scanner?
Erfahren Sie mehrControlLogix, CompactLogix, and SLC Message Samples through the AN-X(2) DH+ gateway
tn130628-001_an-x2-ab-dhrio_dhplus_msg.pdf ... Message samples for common Rockwell Automation processors through the DH+ bridge on an AN-X-AB-DHRIO or an AN-X2-AB-DHRIO gateway. ... DH Plus, DH+, AN-X-DHP, Message Sample, DH+ Bridge, AN-X2-AB-DHRIO DH+, AN-X2-AB-DHRIO DHP ... ControlLogix, CompactLogix, and SLC Message Samples through the AN-X(2) DH+ gateway
Erfahren Sie mehrHow do I set the IP Address in an AN-X Gateway
Most AN-X gateways require the use of the AnxInit.exe utility to set the IP Address or to change the firmware in the gateway. Note: For AN-X2 gateways the IP address is changed from the gateway
Erfahren Sie mehrMVI56E-LDM FAQ
from http://www.prosoft-technology.com/Landing-Pages/Development/Linux-Development-Module-Development-Kit .
Erfahren Sie mehr