Two-Port Building Automation Gateway
What do you need help with?
Where can I get firmware for ProSoft products?
Firmware upgrades for Industrial Radios or AN-X(2) gateways can be found by navigating to the appropriate product on the following web page: http
Erfahren Sie mehrHow do I completely remove a ProSoft Add-On Instruction (AOI) from a RSLogix5000 project?
order: 1. Delete the ProSoft card from the I/O configuration in Slot X. 2. Delete the ProSoft AOI rung from the logic. 3. In the Controller Tags, click on the bottom tab 'Edit Tags'. Delete
Erfahren Sie mehrDNspector Frequently Asked Questions
baud rate selection using BTR0 and BTR1 Allows customizable Message Delays, allowing for monitoring of slower devices or networks. 3. Where is the DNspector User’s Manual located
Erfahren Sie mehrW5-JDC4 Frequently Asked Questions
system, enabling you to select just the right peripheral devices for your application without limiting your selection to DeviceNet-cable devices only. 3. How can I change the DeviceNet MAC ID
Erfahren Sie mehrWRC-CANX / CANR Frequently Asked Questions
to the other extender, which receives them, then reproduces the messages on the CANbus without processing or modifying them. 3. What are all of these different models? Which WRC CANX or CANR should I
Erfahren Sie mehr