Two-Port Building Automation Gateway
What do you need help with?
I am using a ProSoft MVI46 solution and I am getting a Fault Message that says, "Specialty I/O Module in Slot x has not responded within the time limit." What can cause this?
during normal operation, it might cause this fault. 3. In the module BIOS settings screen, there is a parameter called "Console on Port". The options for this parameter are "Enabled" and "Disabled
Erfahren Sie mehrHow do I run the ProSoft Wireless Designer (PWD) software as an Administrator on Windows 7?
1. From the Start Menu or PWD icon, right click and select Properties. 2. Select the 'Compatibility' tab in the ProSoft Wireless Designer Properties window. 3. Check the box 'Run this program
Erfahren Sie mehrWhy is the FTView application not getting any data from the AN-X2-AB-DHRIO Gateway running the RIO HMI firmware?
and select the second processor which should be the L40C. 3) Enter in the IP Address of the AN-X2-AB-DHRIO gateway. 4) Finish the shortcut configuration, and then select the copy from design time to run
Erfahren Sie mehrWhen converting from a 2100-AGA to an AFC flow module, why are there different flow values between the 2 modules?
The attached document describes the differences in the calculations when using AGA 3.
Erfahren Sie mehrI am trying to use ProSoft Wireless Designer, version 2.1.3, and getting unknown or unresolved error messages. How do I fix this?
I am trying to use ProSoft Wireless Designer, version 2.1.3, and getting unknown or unresolved error messages. How do I fix this?
Erfahren Sie mehr