Two-Port Building Automation Gateway
What do you need help with?
Where can I get firmware for ProSoft products?
Firmware upgrades for Industrial Radios or AN-X(2) gateways can be found by navigating to the appropriate product on the following web page: http
Erfahren Sie mehrWhat components do I need for a wireless Ethernet network between ControlLogix and 1734 Point I/O PLCs?
-IHA: 802.11a Industrial Hotspot RLXIB-IHG: 802.11g Industrial Hotspot Links to the product page for these products: http://www.prosoft-technology.com/content/view/full/12109 Which radio you choose
Erfahren Sie mehrHow can I edit the backplane exchange size on the MVI56-ADM?
. The last argument of the these two functions (MVIcip_WriteConnected and MVIcip_ReadConnected) is the dataSize argument in size of bytes. The detail on how to use these two functions can be found on page 273
Erfahren Sie mehrWhy is the FTView application not getting any data from the AN-X2-AB-DHRIO Gateway running the RIO HMI firmware?
, or is not running the correct firmware. To validate this open the web page for the AN-X2-AB-DHRIO gateway and verify that it is running the AB HMI firmware under the Administration area: Then confirm
Erfahren Sie mehrIn the IEC 60870-5-104 protocol, what is the purpose of the "RESET_PROCESS" command, "C_RP_NC_1"; and what does it do?
procedure to close an open socket connection. On page 45 of the protocol specification, it describes the process as: Figure 20 shows the controlling station establishing a connection by giving an Active
Erfahren Sie mehr