EtherNet/IP™ to DH+ Gateway
What do you need help with?
Do AN-X2-AB-DHRIO gateways work with redundant ControlLogix processors?
Yes, the AN-X2-AB-DHRIO gateways are capable of communicating via EtherNet/IP with a ControlLogix system that is configured with redundant processors. Due to the nature of the redundancy, the AN ... Do AN-X2-AB-DHRIO gateways work with redundant ControlLogix processors? ... AN-X2, DHRIO, redundant, Control, Logix, ControlLogix, Processors, AN-X2-AB, AN-X-AB, ANX ... Do AN-X2-AB-DHRIO gateways work with redundant ControlLogix processors?
Erfahren Sie mehrWhat are the pin outs for the RJ-45 jack on my Prosoft MVI module?
The pins in the RJ-45 jacks on the MVI-series modules are numbered 1, 2, 3,...8, top to bottom. Pin 1 is the topmost pin in the jack, pin 8 is the bottommost pin in the jack. You can eliminate
Erfahren Sie mehrWhat is the Mean Time Between Failure (MTBF) for the RLX-IH modules?
The RLX-IH module line is 2,190,000 hours.
Erfahren Sie mehrIn the GSC modules, what are the possible values for the RxState and Tx State parameter?
The values and definitions for the RXstate parameter are: -1 : waiting for receive data. 1 : receiving data. 2 : waiting for backplane transfer the values and definitions
Erfahren Sie mehrMicrotLogix processor memory consumption using MVI69-GSC
files (63 words each) and 2 program files that are very easy to implement into your own project. This program can receive and send a maximum of 50 characters on each port.
Erfahren Sie mehr