We can't wait to see you at Booth #1018 at Automation Fair® 2019 Click here to register.
Knowledge Base / Wireless

Frequency Hopper Radio

Search KB

Kategorien

Can I use the RLX-FHES Radio Modem to connect two serial devices over an EtherNet network?

This is sometimes referred to as serial "tunneling" - where serial data packets from a serial device are embedded in a TCP/IP packet and transmitted through the EtherNet infrastructure (wired or wireless) to another serial device, where the radio (vs. virtual com port s...

Erfahren Sie mehr

What is the Mean Time Between Failure (MTBF) for the RLX-FHS modules?

The MTBF for the RLX-FHS module line is 763,471hours. ...

Erfahren Sie mehr

What is the Mean Time Between Failure (MTBF) for the RLX-FHE and RLX-FHES modules?

All RLX-FHE modules all RLX-FHES modules the MTBF for the RLX-FHE and RLX-FHES module lines is 616,701 hours....

Erfahren Sie mehr

My RSSI values do not seem to be accurate beyond a -60dBM signal in my RLX-IFH9E/RLXIFH24E radio. Why?

Due to the design and physical limitations of the RLX-IFH9E and RLX-IFH24E radios, any RSSI values reported that are greater than -60dBm is not accurate.  These values cannot be compared to provide a meaningful status of the signal level.   For example, an RSS...

Erfahren Sie mehr

What is the Mean Time Between Failure (MBTF) for the RLX2-IFH9E?

The Mean Time Between Failure (MBTF) for the RLX2-IFH9E is 1,340,280 Hours....

Erfahren Sie mehr

What is the Mean Time Between Failure (MBTF) for the RLX2-IFH24E?

The Mean Time Between Failure (MBTF) for the RLX2-IFH24E is 1,059,960 Hours....

Erfahren Sie mehr

Is the RLX-IFH9S compatible with the RLX-IFH9E?

These radios are not compatible. The RLX-IFH9S is configured via Serial The RLX-IFH9E is configured via EthernetYou cannot mix the Serial and Ethernet radios together in a network....

Erfahren Sie mehr

What kind of radio frequencies does ProSoft offer?

ProSoft offers 900MHz, 2.4GHz, 5GHz, and Cellular (GSM/CDMA) frequency solutions...

Erfahren Sie mehr