EtherNet/IP™ to DH+ Gateway
What do you need help with?
What AGA specification version is used for Flow Calculations in the ProSoft MVIxx-AFC modules?
The AGA Specifications include Part 1 "General Equations and Uncertainty Guidelines", dated 1990; Part 2 "Specification and Installation Requirements", dated 2000; Part 3 "Natural Gas Applications
Erfahren Sie mehrIn the IEC 60870-5-104 protocol, what is the purpose of the "RESET_PROCESS" command, "C_RP_NC_1"; and what does it do?
The Reset_Process command is defined in Section 7.1 of the IEC-870-5-104 protocol specification document, the section covering Station Initialization. This command is used as part of the connection ... In the IEC 60870-5-104 protocol, what is the purpose of the "RESET_PROCESS" command, "C_RP_NC_1"; and what does it do?
Erfahren Sie mehrHow do I change the name and address of the Site Operator in my Opacts/TermLinx application?
How do I change the name and address of the site operator in my Opacts / Termlinx application? (1) Run the database manager (not the wizard), connecting to the database and selecting
Erfahren Sie mehrWhat do the QuickServer LEDs indicate?
the R1 serial port (the top serial port), these LEDs are not used and should not be active. PWR - This LED indicates that the QuickServer is receiving power. If this LED is not active, the QuickServer
Erfahren Sie mehrHow do I control Binary Outputs Using the MVI56E-DNPNET Module?
_Address 5 DNPNET.CONTROL.CROB_Commands.CROB_Commands[0].Object 12 DNPNET.CONTROL.CROB_Commands.CROB_Commands[0].Variation 1 DNPNET
Erfahren Sie mehr