Knowledge Base / Gateways / AN-X / AN-X2


Search KB


Browse Categories

My AN-X2-AB-DHRIO Web GUI seems to be missing the Automation Network tab, what does this mean?

The AN-X2-AB-DHRIO is a multi-purpose gateway which comes shipped with multiple Firmware options already installed on the module, but only one Firmware can be active at any given time.  Each Firmware has its own web interface, with its own tab arrangements that often does no...

Erfahren Sie mehr

Do AN-X2-AB-DHRIO gateways work with redundant ControlLogix processors?

Yes, the AN-X2-AB-DHRIO gateways are capable of communicating via EtherNet/IP with a ControlLogix system that is configured with redundant processors.  Due to the nature of the redundancy, the AN-X itself does not care WHICH processor it is talking to, it is programmed to ta...

Erfahren Sie mehr

Which firmware should I use for a DH+ PLC to an EtherNet/IP HMI

If you intend to use an AN-X2-AB-DHRIO to connect anything, including an HMI, on EtherNet/IP to something on Data Highway Plus, you will be using the DHP firmware. The HMI firmware is for use only with connecting HMIs like panel views to Remote I/O PLC and will not work in DH+ a...

Erfahren Sie mehr